Expansion cards and backup units
7.2.7.5
Concluding steps
Perform the following procedures to complete the task:
Ê Close the server blade as described in section
page
59.
Ê Reinstall and secure the server blade in the system unit as described in
section
"Installing the server blade in the system unit" on page
Ê Enable boot watchdog functionality as described in section
watchdog functionality" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
162
89.
96.
Upgrade and Maintenance Manual
"Closing the server blade" on
60.
"Enabling boot
"Enabling
BX920 S3