Removing The Server Blade From The System Unit - Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual

Basic hardware procedures
4.4.2

Removing the server blade from the system unit

Ê Shut down the server blade as described in section "Preliminary steps" on
page 56.
Figure 8: Removing the server blade from the system unit
Ê Push the release lever (1) up slightly to unlock the ejection lever (2).
Ê Swivel the ejection lever down until it is horizontal.
Ê Pull the server blade out of the system unit.
Upgrade and Maintenance Manual 57
BX920 S3