Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual page 105

Figure 16: Removing the 2.5-inch dummy module
Ê Press both tabs on the dummy module together until the locking mechanism
disengages (1).
Ê Pull the dummy module out of the bay (2).
V
CAUTION!
Store the dummy module in a safe place. If you have removed an
HDD/SSD module and do not install a new one in its place, put the
dummy module back in its place for cooling, to comply with EMC
regulations (regulations regarding electromagnetic compatibility), and for
protection against fire. Ensure that the dummy module engages correctly
in the bay.
BX920 S3
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
105