Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual page 192

Processors
Ê Shut down the server blade as described in section
server blade" on page
Ê Remove the server blade from the system unit as described in section
"Removing the server blade from the system unit" on page
Ê Open the server blade as described in section
on page 58.
Ê If necessary, remove the memory modules as described in section
"Removing a memory module" on page
Ê Remove the desired processor heat sink as described in section
processor heat sinks" on page
192
55.
206.
Upgrade and Maintenance Manual
"Shutting down the
"Opening the server blade"
176.
57.
"Removing
BX920 S3