Component Leds - Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual

Basic hardware procedures
Ê Remove the server blade from the system unit as described in section
"Removing the server blade from the system unit" on page
Ê Open the server blade as described in section
on page 58.
Ê Press the Indicate CSS button (1) to highlight defective components.

Component LEDs

I
LEDs C to G are visible from the frontside. All other LEDs are only visible
if the server blade cover has been removed. In order to access memory
LEDs (B), the air cowls need to be removed (see section
memory air cowls" on page
Indicator
A Mezzanine card 1
B Memory
Fabric 3/4
C
D Fabric 2
E Fabric 1
F CSS
G
Global Error
52
181).
Status Description
off Mezzanine card 1 operational
orange on Mezzanine card 1 failure
off memory module operational
orange on memory module failure
off Fabric 3/4 no link
green flashing Fabric 3/4 link active
green on Fabric 3/4 link established
off Fabric 2 no link
green flashing Fabric 2 link active
green on Fabric 2 link established
off Fabric 1 no link
green flashing Fabric 1 link active
green on Fabric 1 link established
off System is ok
yellow
CSS error detected
flashing
yellow on Prefailure event detected
off No critical event
orange
Error detected (requires service intervention)
flashing
Prefailure event detected (requires service
orange on
intervention)
Upgrade and Maintenance Manual
57.
"Opening the server blade"
"Handling of
BX920 S3