Leds On Each Component - Fujitsu M10-4 Service Manual

Figure 2-11 Location of the system locator
Table 2-11 Status of the system locator
Icon
*1 The blink interval is 1 second (1 Hz).
2.4.3

LEDs on each component

Each component of the SPARC M10-4/M10-4S has a mounted LED. These LEDs light
to indicate that a component requires maintenance if that component experiences a
fault. Start maintenance work after checking the LED status.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ November 2014
26
Name Color Description
CHECK Amber Indicates the system operation status for each chassis.
●
●
●
A
On: An error that prevents startup was detected.
Off: Normal, or the power is disconnected or not being
supplied.
Blinking (*1): Indicates that the chassis requires
maintenance (this function is also referred to as the
"locator").