Service Manual
EPL-9000
3.2.4.6 Retard Pad Removal
1.
Open the front cover.
2. Remove the retard pad.
3.2.4.7 Trans. Chute Assembly Removal
1.
Open the front cover.
Remove the BTR assembly. (Refer to Section 3.2.4.4.)
2.
Disconnect comector P/J129 from the chute fan.
3
Remove 4 CPFS screws (M3 x 10) securing the trans. chute assembly.
5.
Remove 2 CBB screws (M3 x 8) securing the wire of the trans. chute assembly.
Figure 3-30. Removing the Trans. Chute Assembly
Figure 3-29. Removing the Retard Pad
Disassembly and Assembly