Using Locks - Dish Network Receiver User Manual

Chapter 3
Using the System

Using Locks

How to Set Locks: A Two-Step Process
When You Have Locked the Receiver
Page 90
3. At the
Search History
• —Select one of the items and then select
Search
• —Select one of the items and then select
Edit
• —Select one of the items and then select
Delete
• —Select
Delete All
When you unlock programming delivered by the
to your in-home cabling system, you are allowing all TVs
connected to your in-home cabling system to have access to
this programming. In this case, you must rely on the V-Chip
technology and settings in the individual TVs to prevent
viewing of inappropriate programming. Consult your TV user
guides for instructions to set up V-Chip protection.
: Locks for programming on the
Note
using the menus. Locks for programming on the
TV1
TVs are set using the
TV2
either or menus. Locks set for
TV1 TV2
locks set for programming.
TV2
1. Create the locks that you want.
2. Lock the receiver.
When the receiver is locked, anyone who wants to access locked items must
enter the password.
• If you try to access a locked item or open the
displays a message prompting you to enter the password.
• The receiver allows you three tries to enter the correct password. If you fail
to enter the correct password, the receiver does not allow more tries for
several minutes.
• If you enter the correct password, you can access the locked item or open
the menu.
Locks
•
If you exit a locked item or close the
password to access the item.
screen, you have the following options:
to clear the
Delete All
outputs for the nearby TV are set
TV1
menus. The section below applies to locks set by
programming are separate from
TV1
Locks
menu, you must enter the
Locks
.
Search
to make changes.
Edit
.
Delete
.
Search History
outputs
TV2
outputs to remote
TV2
menu, the receiver