Dish Network Receiver User Manual page 11

Fixed Images
On some TVs, the presence of fixed images for extended
periods of time may cause them to be permanently displayed
on the screen. Consult your TV user guide for information on
whether this is a problem for your TV, what operating/
viewing restrictions apply to avoid this problem, and
associated TV warranty coverage.
DISH Network Logo
Whenever the receiver's outputs are turned off using the
remote control or front panel POWER buttons, you will
see the DISH Network logo moving around on your TV
screen. This feature is included with your receiver to
ensure your receiver and TV(s) remain connected. Press
the blank POWER or SELECT button on the remote
control to resume watching satellite TV programming.
Make sure you are using the correct remote (see page 26
for details).
: This logo is displayed on all TV1 and TV2 outputs except the
Note
CH 3–4 OUT. So if your nearby TV is connected using the CH 3–4 OUT,
this logo will not be displayed.
Overview
Page 5