Chapter 2 - Receiver Description And Installation; Receiver Front Panel - Dish Network Receiver User Manual

Chapter 2
Receiver Description and Installation

Receiver Front Panel

Smart Card Door
Behind this door is a slot for a future smart card. No smart card is included with
this receiver.
Arrow Buttons
Use the ARROW buttons to change satellite channels displayed on the nearby
TV.
Indicators
• —The green light indicates that the receiver is providing
TV1 Power
programming to the nearby TV through the
• —The blue light indicates that the receiver is providing
TV2 Power
programming to the remote TVs through the
• —Indicates that the receiver is recording.
Recording
have recording indicators.
• —Indicates if the receiver is in
Mode
details).
Buttons
The buttons on the receiver give you some control of the receiver. However,
most of the time you will want to use the remote controls that came with your
receiver.
—Press the receiver MODE button to switch between
•
Mode
mode (see page 47 for details).
Dual
: The first time you turn on your receiver, the receiver will be in
Note
mode. Press the MODE button to see if
receiver.
• —Displays the
System Info
• —Displays the
Menu
ARROWS and SELECT buttons to navigate through
Single
Single Mode
screen on the nearby TV.
System Info
. After you press this button, use the
Main Menu
output connections.
TV1
output connections.
TV2
and
TV1 TV2
or mode (see page 47 for
Dual
Single
is available on your
's menus.
TV1
each
and
Dual
Page 23