Let The Wireless Vpn Firewall Automatically Detect And Configure An Ipv4 Internet Connection - NETGEAR ProSafe FVS318N Reference Manual

Prosafe wireless-n 8-port gigabit vpn firewall

Hide thumbs Also See for ProSafe FVS318N:

Table of Contents

Select the NAT radio button or the Classical Routing radio button.

Changing the WAN mode causes all LAN WAN and DMZ WAN

inbound rules to revert to default settings.

Click Apply to save your settings.

Let the Wireless VPN Firewall Automatically Detect and

Configure an IPv4 Internet Connection

To automatically configure the WAN port for an IPv4 connection to the Internet:

Select Network Configuration > WAN Settings > Broadband ISP Settings. In the

upper right of the screen, the IPv4 radio button is selected by default. The ISP

Broadband Settings screen displays the IPv4 settings:

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

IPv4 and IPv6 Internet and Broadband Settings

Troubleshooting