Vpn Firewall Vpn Connection Status And Logs - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336Gv2 Reference Manual

VPN Firewall VPN Connection Status and Logs

To view VPN firewall VPN connection status, go to VPN > Connection Status.
You can set a poll interval (in seconds) to check the connection status of all active IKE
policies to obtain the latest VPN tunnel activity. The Active IPSec SA(s) table also lists
current data for each active IPsec SA (security association):
• Policy Name. The name of the VPN policy associated with this SA.
• Endpoint. The IP address on the remote VPN endpoint.
• Tx (KBytes). The amount of data transmitted over this SA.
• Tx (Packets). The number of packets transmitted over this SA.
• State. The current state of the SA. Phase 1 is "Authentication phase" and Phase 2 is "Key
Exchange phase".
Action. Allows you to terminate or build the SA (connection), if required.
To view VPN firewall VPN logs, select Monitoring > VPN Logs from the menu. The IPSec
VPN Logs screen is displayed.
82 | Chapter 5: Virtual Private Networking Using IPsec