NETGEAR ProSafe FVS318N Reference Manual page 191

Figure 103.
2. In the Add Port Triggering Rule section, enter the settings as explained in the following table:
Table 41. Port Triggering screen settings
Setting
Name
Enable
Protocol
Outgoing Ports
Incoming Ports
3. Click the Add table button. The new port triggering rule is added to the Port Triggering Rules
table.

To edit a port triggering rule:
1. In the Port Triggering Rules table, click the Edit table button to the right of the port
triggering rule that you want to edit. The Edit Port Triggering Rule screen displays.
2. Modify the settings that you wish to change (see the previous table).
3. Click Apply to save your changes. The modified port triggering rule is displayed in the Port
Triggering Rules table.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Description
A descriptive name of the rule for identification and management purposes.
From the drop-down list, select Yes to enable the rule. (You can define a rule but not
enable it.) The default setting is No.
From the drop-down list, select the protocol to which the rule applies:
• TCP. The rule applies to an application that uses the Transmission Control
Protocol (TCP).
• UDP. The rule applies to an application that uses the User Datagram Protocol
(UDP).
Start Port The start port (1–65535) of the range for triggering.
End Port The end port (1–65535) of the range for triggering.
Start Port The start port (1–65535) of the range for responding.
End Port The end port (1–65535) of the range for responding.
Firewall Protection
191