NETGEAR ProSafe FVS318N Reference Manual page 189


To edit an IP/MAC binding:
1. In the IP/MAC Bindings table, click the Edit table button to the right of the IP/MAC
binding that you want to edit. The Edit IP/MAC Binding screen displays.
2. Modify the settings that you wish to change (see the previous table; you can change the
MAC address, IPv6 address, and logging status).
3. Click Apply to save your changes. The modified IP/MAC binding displays in the IP/MAC
Bindings table.

To remove one or more IP/MAC bindings from the table:
1. Select the check box to the left of each IP/MAC binding that you want to delete, or click
the Select All table button to select all bindings.
2. Click the Delete table button.

To change the IPv6 MAC polling interval from its default setting of 10 seconds:
1. On the IP/MAC Bindings screen for IPv6, to the right of the IP/MAC Binding tab, click
the Set Poll Interval option arrow. The IP MAC Binding Poll Interval (IPv6) pop-up
screen displays:
Figure 102.
2. Click the Stop button. Wait until the Poll Interval field becomes available.
3. Enter new poll interval in seconds.
4. Click the Set Interval button. Wait for the confirmation that the operation has succeeded
before you close the window.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Firewall Protection
189