NETGEAR ProSafe FVS318N Reference Manual page 87

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 44.
2. Enter the settings as explained in the following table:
Table 18. DMZ Setup screen settings for IPv4
Setting
DMZ Port Setup
Do you want to
enable DMZ Port?
Description
Select one of the following radio buttons:
• Yes. Enables you to configure the DMZ port settings. Fill in the IP Address and
Subnet Mask fields.
• No. Allows you to disable the DMZ port after you have configured it.
IP Address Enter the IP address of the DMZ port. Make sure that the DMZ
port IP address and LAN port IP address are in different
subnets (for example, an address outside the LAN DHCP
address pool, such as 192.168.1.101 when the LAN DHCP
pool is 192.168.1.2–192.168.1.100). The default IP address for
the DMZ port 176.16.2.1.
LAN Configuration
87