NETGEAR ProSafe FVS318N Reference Manual page 247

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
4. Click Apply to save your settings. The new Mode Config record is added to the List of Mode
Config Records table.
Continue the Mode Config configuration procedure by configuring an IKE policy.
5. Select VPN > IPSec VPN. The IPSec VPN submenu tabs display with the IKE Policies
screen in view (see
6. Under the List of IKE Policies table, click the Add table button. The Add IKE Policy screen
displays the IPv4 settings (see the next figure).
7. Specify the IP version for which you want to add an IKE policy:
• IPv4. In the upper right of the screen, the IPv4 radio button is already selected by
default. Go to Step
• IPv6. Select the IPv6 radio button. The Add IKE Policy screen for IPv6 displays. This
screen is identical to the Add IKE Policy screen for IPv4 (see the next figure).
Note: You can configure an IPv6 IKE policy to assign IPv4 addresses to
clients, but you cannot assign IPv6 addresses to clients.
Virtual Private Networking Using IPSec and L2TP Connections
Figure 139 on page 223).
8.
247