NETGEAR ProSafe FVS318N Reference Manual page 385

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
c. Make sure that Internet Protocol Version 6 (TCP/IPv6) displays, as is shown in the
previous figure.
• Make sure that the computer has an IPv6 address. If the computer has a link-local
address only, it cannot reach the wireless VPN firewall or the Internet. On a computer that
runs a Windows-based operating system, do the following (note that the steps might differ
on the various Windows operating systems):
a. Open the Network Connections screen or the Network and Sharing Center screen.
For example, on the Windows taskbar, click Start, then select Control Panel, and
then Network Connections.
b. Click or double-click Local Area Connection for the connection to the wireless VPN
firewall.
c. Click or double-click View status of this connection. The Local Area Connection
Status screen displays:
Figure 229.
d. Make sure that Internet access shows for the IPv6 connection. (The previous figure
shows that there is no Internet access.)
e. Click Details. The Network Connection Details screen displays:
Troubleshooting
385