NETGEAR ProSafe FVS318N Reference Manual page 48

Figure 25.
2. Click the Add table button under the List of Available ISATAP Tunnels table. The Add
ISATAP Tunnel screen displays:
Figure 26.
3. Specify the tunnel settings as explained in the following table.
Table 9. Add ISATAP Tunnel screen settings
Setting
ISATAP Subnet Prefix
Local End Point
Address
IPv4 Address
4. Click Apply to save your changes.

To edit an ISATAP tunnel:
1. On the ISATAP Tunnels screen, click the Edit button in the Action column for the tunnel
that you want to modify. The Edit ISATAP Tunnel screen displays. This screen is
identical to the Add ISATAP Tunnel screen.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Description
The IPv6 prefix for the tunnel.
From the drop-down list, select the type of local address:
• LAN. The local endpoint address is the address of the default VLAN.
• Other IP. The local endpoint address is another LAN IP address that you need
to specify in the IPv4 Address fields.
If you select Other IP from the Local End Point Address drop-down list, enter the
IPv4 address.
IPv4 and IPv6 Internet and Broadband Settings
48