NETGEAR ProSafe FVS318N Reference Manual page 81


To configure the Router Advertisement Daemon for the LAN:
1. Select Network Configuration > LAN Setup.
2. In the upper right of the screen, select the IPv6 radio button. The LAN Setup screen displays
the IPv6 settings (see
3. To the right of the LAN Setup tab, click the RADVD option arrow. The RADVD screen for the
LAN displays. (The following figure contains some examples.)
Figure 41.
4. Enter the settings as explained in the following table:
Table 16. RADVD screen settings for the LAN
Setting
RADVD Status
Advertise Mode
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 38 on page 75.)
Description
Specify the RADVD status by making a selection from the drop-down list:
• Enable. The RADVD is enabled, and the RADVD fields become available for you to
configure.
• Disable. The RADVD is disabled, and the RADVD fields are masked out. This is the
default setting.
Specify the advertisement mode by making a selection from the drop-down list:
• Unsolicited Multicast. The wireless VPN firewall advertises unsolicited multicast
packets at a rate that is specified by the advertisement interval.
• Unicast only. The wireless VPN firewall responds to unicast packet requests only.
No unsolicited packets are advertised. Select this option for nonbroadcast multiple
access (NBMA) links such as ISATAP.
LAN Configuration
81