Configure Applications For Port Forwarding; Add Servers And Port Numbers - NETGEAR ProSafe FVS318N Reference Manual

access policies. When you create a group, you need to specify a domain. Therefore, you
should create any domains first, then groups, and then user accounts.
For information about how to configure domains, groups, and users, see
Authentication Domains, Groups, and Users

Configure Applications for Port Forwarding

•

Add Servers and Port Numbers

• Add a New Host Name
Port forwarding provides access to specific defined network services. To define these
services, you need to specify the internal server addresses and port numbers for TCP
applications that are intercepted by the port forwarding client on the user's computer. This
client reroutes the traffic to the wireless VPN firewall.
Add Servers and Port Numbers
To configure port forwarding, you need to define the IP addresses of the internal servers and
the port number for TCP applications that are available to remote users.

To add a server and a port number:
1. Select VPN > SSL VPN > Port Forwarding. The Port Forwarding screen displays. (The
following figure shows an example.)
Figure 165.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Virtual Private Networking Using SSL Connections
on page 296.
273
Configure