NETGEAR ProSafe FVS318N Reference Manual page 91

Prosafe wireless-n 8-port gigabit vpn firewall
Hide thumbs Also See for ProSafe FVS318N:
Table of Contents

Advertisement

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
3.
Enter the settings as explained in the following table:
Table 19. DMZ Setup screen settings for IPv6
Setting
DMZ Port Setup
Do you want to
enable DMZ Port?
DHCPv6 for DMZ Connected Computers
DHCP Status
Description
Select one of the following radio buttons:
• Yes. Enables you to configure the DMZ port settings. Fill in the IP Address and
Subnet Mask fields.
• No. Allows you to disable the DMZ port after you have configured it.
IPv6 Address
Enter the IP address of the DMZ port. Make sure that the DMZ
port IP address, LAN port IP address, and WAN port IP
address are in different subnets. The default IP address for the
DMZ port is 176::1.
Prefix Length
Enter the IPv6 prefix length, for example, 10 or 64. The default
prefix length for the DMZ port is 64.
Specify the status of the DHCPv6 server:
• Disable DHCPv6 Server. This is the default setting, and the DHCPv6 fields are
masked out.
• Enable the DHCPv6 Server. If you enable the server, you need to complete the
DHCPv6 fields.
DHCP Mode
Select one of the DHCPv6 modes from the drop-down list:
• Stateless. The IPv6 clients generate their own IP address by
using a combination of locally available information and
router advertisements, but receive DNS server information
from the DHCPv6 server. For stateless DHCPv6, you need to
configure the RADVD and advertisement prefixes (see
Configure the IPv6 Router Advertisement Daemon and
Advertisement Prefixes for the DMZ
• Stateful. The IPv6 clients obtain an interface IP address,
configuration information such as DNS server information,
and other parameters from the DHCPv6 server. The IP
address is a dynamic address. (see
Pools
Domain Name
Enter the domain name of the DHCP server.
Server Preference Enter the DHCP server preference value. The possible values
are 0–255, with 255 as the default setting.
This is an optional setting that specifies the server's preference
value in a server advertise message. The client selects the
server with the highest preference value as the preferred
server.
LAN Configuration
91
on page 92).
on page 93).
IPv6 DMZ Address

Advertisement

Table of Contents
loading

Table of Contents