NETGEAR ProSafe FVS318N Reference Manual page 363

Table 88. Detailed Status screen information (continued)
Item
Wireless Profile Information
SSID
Security Settings
Encryption
Authentication
IP Address
AP MAC Address
Status
Tunnel Status Screen
The IPv6 Tunnel Status screen displays the status of all active 6to4 and ISATAP tunnels and
their IPv6 addresses.

To view the status of the tunnels and IPv6 addresses:
Select Monitoring > Router Status > Tunnel Status. The Tunnel Status screen displays:
Figure 212.
The IPv6 Tunnel Status table shows the following fields:
• Tunnel Name. The tunnel name for the 6to4 tunnel is always sit0-WAN1 (SIT stands for
simple Internet transition); the tunnel name for an ISATAP tunnel is isatapx-LAN, in which
x is an integer.
• IPv6 Address. The IPv6 address of the local tunnel endpoint.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Description
The SSID of the wireless profile.
The security settings of the wireless profile.
The encryption that is configured on the
wireless profile,
The authentication that is configured on the
wireless profile,
The IP address of the wireless profile.
The MAC address of the wireless profile.
The status can be Enabled or Disabled,
depending on whether the wireless profile is
enabled.
Monitor System Access and Performance
For information about configuring
wireless profiles, see
Enable Wireless Profiles
363
Configure and
on page 115.