NETGEAR ProSafe FVS318N Reference Manual page 154

• Edit. Allows you to make any changes to the definition of an existing rule. Depending on
your selection, one of the following screens displays:
- Edit LAN DMZ Outbound Service screen for IPv4 (identical to
- Edit LAN DMZ Inbound Service screen for IPv4 (identical to

To access the LAN DMZ Rules screen for IPv6 or to change existing IPv6 rules:
1. Select Security > Firewall > LAN DMZ Rules. The Firewall submenu tabs display with
the LAN DMZ Rules screen for IPv4 in view.
2. In the upper right of the screen, select the IPv6 radio button. The LAN DMZ Rules screen
displays the IPv6 settings. (The following figure contains examples.)
Figure 76.
To change an existing outbound or inbound service rule, in the Action column to the right of
the rule, click one of the following table buttons:
• Up. Moves the rule up one position in the table rank.
• Down. Moves the rule down one position in the table rank.
• Edit. Allows you to make any changes to the definition of an existing rule. Depending on
your selection, one of the following screens displays:
- Edit LAN DMZ Outbound Service screen for IPv6 (identical to
- Edit LAN DMZ Inbound Service screen for IPv6 (identical to

To enable, disable, or delete one or more IPv4 or IPv6 rules:
1. Select the check box to the left of each rule that you want to enable, disable, or delete,
or click the Select All table button to select all rules.
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Firewall Protection
154
Figure 77 on page 155)
Figure 79 on page 157)
Figure 78 on page 156)
Figure 80 on page 158)