Back Panel Description - Cisco DPQ2425 User Manual

Back Panel Description

The following illustrations show the description and function of the back panel
components on the DPQ2425.
1 TELEPHONE 1 and 2—RJ-11 telephone ports connect to home telephone wiring
to conventional telephones or fax machines
2 ETHERNET—Four RJ-45 Ethernet ports connect to the Ethernet port on your PC
or your home network
3 REBOOT EMTA—A momentary pressing (1-2 seconds) of this switch reboots
the EMTA. Pressing the switch for more than ten seconds first causes a reset-to-
factory-default of all settings and then reboots the gateway
4 WIRELESS SETUP—Pressing this switch initiates wireless setup, this feature
allows you to add new Wireless Protected Setup (WPS) compliant wireless
clients to the home network
4028630 Rev A
CAUTION:
The Reboot EMTA button is for maintenance purposes only. Do
not use unless instructed to do so by your service provider.
Doing so may cause you to lose any cable modem settings you
have selected.
Introduction
15