Cisco DPQ2425 User Manual page 93

Setup Wireless - Advanced Page Description
This section describes the section headings and fields descriptions of the Setup
Wireless - Advanced page.
Note: If you make changes in the Setup Wireless - Advanced page, click Apply to
apply and save your wireless advanced settings.
Field Name
54g Network Mode
Basic Rate Set
54g Protection
Xpress Technology
Afterburner
Technology
4028630 Rev A
How Do I Configure My Wireless Residential Gateway with Digital Voice Adapter?
Description
Allows you to optimize the performance of your
wireless network using one of the following options:
Max compatibility (factory default)
Allows the access point to interoperate with both
802.11b and 802.11g wireless client devices and
minimizes interference with nearby 802.11b wireless
networks.
54g Only
The wireless access point will only accept 802.11g
wireless clients.
54g LRS
Allows clients that are not fully compatible with
802.11g to operate with your wireless access point.
Note: Switching to 54g-LRS mode can impact
wireless performance. It is not recommended that
you use this mode unless necessary for the
compatibility described above.
Max Performance
Maximum throughput. In this mode, the wireless
access point accepts only 802.11g wireless clients.
Setting the device in this mode may degrade the
operation of near by 802.11b wireless networks.
Allows you to select the Basic Rate Set
Allows you to prioritize 802.11g communication when
there is a mix of 802.11b and 802.11g devices in the
wireless network using one of the following options:
Auto (factory default)
Maximize 802.11g performance in networks with a
mix of 802.11b and 802.11g wireless client devices.
Off
Maximum performance. Networks with
802.11g-only wireless client devices.
Allows you to enable or disable Xpress Technology
Allows you to enable or disable Afterburner Technology
93