Cisco DPQ2425 User Manual page 112

Front Panel LED Status Indicator Functions
Normal Operations (AC Power applied)
The following chart illustrates the appearance of the wireless residential gateway
front panel LED status indicators during normal operations when AC power is
applied to the gateway.
Front Panel LED Status Indicators During Normal Conditions
Front Panel Indicator
1 POWER
2 DS
3 US
4 ONLINE
5 LAN1-LAN4
6 WIRELESS
7 TEL 1
8 TEl 2
112
Normal Operations
On
On
On
On
On - When a single device is connected to the
Ethernet port and no data is being sent to or
from the modem
Blinks - When only one Ethernet device is
connected and data is being transferred
between the consumer premise equipment
(CPE) and the wireless home gateway
Off - When no devices are connected to the
Ethernet ports
On - When the wireless access point is
enabled and operational
Blinks - When data is being transferred
between the CPE and the wireless home
gateway
Off - When the wireless access point is
disabled by the user
On - When telephony service is enabled
Blinks - When line 1 is in use
On - When telephony service is enabled
Blinks - When line 2 is in use
4028630 Rev A