Cisco DPQ2425 User Manual page 90

How Do I Configure My Wireless Residential Gateway with Digital Voice Adapter?
Field Name
Current Network Key
PassPhrase
Wi-Fi Protected Setup (WPS) Section
The selections available in this section allow you to configure WPS.
Field Name
WPS Config
Device Name
WPS Setup AP Section
The selections available in this section allow you to use PIN-protected security.
Field Name
PIN
Status
90
Description
Allows you to select which of the four 64-bit or 128-bit
keys to use to encrypt your data when you are using
encryption that requires the manual entry of an encryption
key. Only one WEP key is in use at a time. You must
manually change keys. They do not change automatically.
Notes:
64-bit and 40-bit encryption are two different names
for the same encryption
128-bit and 104-bit encryption are two different names
for the same encryption
Automatically generates WEP encryption keys required to
communicate with the network.
Although not required for WEP operation, use of a
PassPhrase can simplify the configuration and setup of
each of your client wireless adapters.
Using a PassPhrase eliminates the need to manual enter
lengthy encryption keys and reduces the chance of error
associated with entering entry of large numbers.
Important: Click Generate WEP Keys when complete.
Description
Allows you to enable or disable WPS
Allows you to enter your device name
Description
The personal identification number (PIN) of a device trying
to connect
Displays WPS status
4028630 Rev A