Cisco DPQ2425 User Manual page 40

How Do I Configure My Wireless Residential Gateway with Digital Voice Adapter?
Setup Basic Settings - Enable/Disable Time Synchronization by
Network Time Protocol Page Description
The following table provides a description of the fields within the Basic Settings
Enable/Disable time synchronization by Network Time protocol page.
Field Name
Current System Time
Network Time Protocol
Latest Update Success
Time Zone
Daylight Saving Time
Time Server
40
Description
Displays the current system time and date
Allows you to enable or disable network time
protocol
Note: The wireless residential gateway will
automatically use the time server in your
broadband network. Should there be no current
time displayed or if the network time is incorrect,
enable Network Time Protocol to use a public
Internet time server to set the clock in the gateway.
Displays the time and date of the last successful
time update
Displays the current time zone. The drop-down list
allows you to select your local time zone.
Allows you to adjust the time during periods when
Daylight Saving Time is in effect. Check the Enable
box to enable or disable this setting.
Note: If the offset for Daylight Savings Time is
other than 60 minutes, enter the offset in the
minutes field.
Add and delete time server URLs or IP addresses to
and from the list, as required. When using Network
Time Protocol, multiple time servers can be
specified for the gateway to query for time of day.
The gateway will sequentially step through the
listed time servers until it acquires the current time.
There are three well known public time servers
entered as default servers.
4028630 Rev A