Cisco DPQ2425 User Manual page 83

Setup Wireless - Basic Page Description
This section describes the section headings and fields descriptions of the Setup
Wireless - Basic page.
Note: If you make changes in the Setup Wireless - Basic page, click Apply to apply
and save your wireless basic settings.
Field Name
Access Point
Service Set Identifier
(SSID)
Basic Service Set
Identifier (BSSID)
Network Type
Country
New Channel (1-11)
Current Channel
Encryption Mode
4028630 Rev A
How Do I Configure My Wireless Residential Gateway with Digital Voice Adapter?
Description
Allows you to turn the access point on the gateway on or
off
The name assigned to this access point
Note: The factory default for the SSID field should contain
the last 6 digits of the cable modem's MAC address as
found on the label.
The MAC address of the access point
Allows you to select Open or Closed for your network
type
Allows you to select the country in which you are using
your access point
Allows setting a communications channel for your access
point
Note: Wireless networking channels overlap. Channels 1,
6, and 11 do not overlap with each other. For best
performance, select one of these channels. If there are
other access points in use in the area, select one of these
channels that is farthest away from the other access points.
Example: If channel 8 is in use by another access point, use
channel 1 for your wireless network.
Note: If your wireless network is not operating correctly,
or if external devices are interfering with your signal,
select a different channel. Use your PC wireless utility
software to scan for other access points in your area.
Present channel the WAP is using
Shows current encryption mode
83