Cisco DPQ2425 User Manual page 95

Field Name
Short Retry Limit
Configuring Wireless Access Point Access Control
Use the Setup Wireless - Access Control page to configure your configure your
wireless access point access control.
Note: If you are not familiar with the advanced settings detailed in this section,
contact your service provider before you attempt to change any of the wireless
residential gateway default wireless advanced settings.
Click Access Control in the Wireless section of the Setup page to access the Setup
Wireless - Access Control page.
Setup Wireless Access Control Page
The following illustration is an example of the Setup Wireless - Access Control page.
4028630 Rev A
How Do I Configure My Wireless Residential Gateway with Digital Voice Adapter?
Description
The number of times the gateway transmits an
unacknowledged unicast frame that is longer than the
RTS threshold before discarding the frame. The factory
default is 4
95