Cisco DPQ2425 User Manual page 96

How Do I Configure My Wireless Residential Gateway with Digital Voice Adapter?
Setup Wireless - Access Control Page Description
This section describes the section headings and field descriptions of the Setup
Wireless - Access Control page.
Field Name
Access restriction
Closed Network
Access List
Connected Clients
Function Keys
The following function keys appear on the Setup Wireless - Access Control page.
Key
Apply
Clear All
Remove
Add
96
Description
When encryption is enabled, this selection allows you
to choose one of the following options from the drop-
down list:
Disable (factory default)–No access restrictions
based on MAC address of wireless access devices
Allow–Allows wireless access to only the MAC
addresses listed in the Access List
Deny–Denies wireless access to only the MAC
address listed in the Access List
Allows you to disable or enable the network to access
by wireless clients. When ON is selected, the access
point does not broadcast the SSID. The client device
must be configured manually with the SSID and the
MAC address of the access point in order to access
with wireless network.
Displays the MAC address of the clients that are
subject to wireless access control
Displays the Host Name, IP Address, and Client ID of
wireless clients that are connected to (associated
with) the gateway modem
Description
Applies and saves the values you enter into the fields
without closing the screen
Clears the Access List
Removes entries from the Access List
Adds a client to the Access List using the MAC
address of the client
4028630 Rev A