Cisco DPQ2425 User Manual page 53

How Do I Configure My Wireless Residential Gateway with Digital Voice Adapter?
Configuring MAC Address Filters
Use the Setup Advanced Settings - MAC Filtering page to configure MAC address
filters. These filters allow you to deny or block access to the Internet by the
individual MAC addresses listed in the table. You can also prevent individual PCs
from sending outgoing TCP/UDP traffic to the WAN using their MAC address.
Note: If you are not familiar with the advanced settings detailed in this section,
contact your service provider before you attempt to change any of the wireless
residential gateway default advanced MAC filtering settings.
Click MAC Address Filtering in the Advanced Settings section of the Setup page to
access the Setup Advanced Settings - MAC Filtering page.
Setup Advanced Settings - MAC Filtering Page
The following illustration is an example of the Setup Advanced Settings - MAC
Filtering page.
Setup Advanced Settings - MAC Filtering Page Description
Use this link to enter the MAC address or MAC addresses of devices whose Internet
access you want to control. Click Apply to apply and save your new MAC address
filter settings.
4028630 Rev A 53