Cisco DPQ2425 User Manual page 46

How Do I Configure My Wireless Residential Gateway with Digital Voice Adapter?
Function Keys
The following function keys appear on the Basic Settings - IP Management page.
Key
Apply
Force Available
Add Primary
Add Secondary
Add Tertiary
Remove WINS Address
Clear All
Reserving IP Addresses
Use the Setup Basic Settings - Fixed CPE IP Assignment page to reserve IP
addresses. This feature allows you to assign a fixed IP address to any device in your
network by setting static IP addresses in your PC or other network device.
These addresses will be removed from the pool of the IP addresses to be used by
your gateway's DHCP server when issuing IP addresses to devices that are
connected to your local network.
Reserving IP addresses is useful in making sure that there are no IP address conflicts
on the network, for example, two devices using the same IP address. Another
example: when using DMZ Host, the IP address for the DMZ Host should always
have the same IP address.
Note: If you are not familiar with the Fixed CPE IP Assignment procedures detailed
in this section, contact your service provider before you attempt to change any of the
wireless residential gateway default Fixed CPE IP Assignment settings.
Click Fixed CPE IP Assignment in the Basic Settings section of the Setup page to
access the Setup Basic Settings - Fixed CPE IP Assignment page.
46
Description
Saves the values you enter into the fields without
closing the screen
Forces the release of an IP address for you to
re-use
Saves the WINS address for one server
Saves the WINS address for a second server
Saves the WINS address for a third server
Removes the WINS address selected
Removes all defined WINS addresses
4028630 Rev A