What The Iw Does And Does Not Do - Avaya G700 Installation Manual

What the IW Does and Does Not Do

The IW automates some but not all tasks in an S8300 Media Server installation.
Tasks IW automates
Of the tasks described in Chapter 3, Installing a New G700 with an S8300, the IW automates
the following:
Configuring the S8300
Configure the G700 Media Gateway
Installing Communication Manager update (patch) files, if any on page 132
Administering Network Regions
Note:
The IW administers the S8300 network region as the default, 1.
Note:
Administering the Media Gateway
Note:
In addition, you can use the IW to upgrade media server software or gateway
Note:
firmware on a previously-installed system.
The IW automates similar tasks in Chapters 4–6.
Tasks IW does not automate
You must perform the following tasks manually, even though you are using the IW:
All hardware installation
Tasks in Before Going to the Customer Site
Any tasks related to adding LSPs to the primary controller you are installing, as
documented in
Any tasks related to administration of the primary controller in
Manager on page 169
Set Up SNMP Alarming on the G700
on page 133
on page 150 and its subtasks
on page 171
on page 182
Administer Communication Manager
on page 114
on page 169:
on page 188, if required
What wizards are available
Administer Communication
Issue 7 January 2005 31