Chapter 1: What procedure you should use
Complete one of the following scenarios to install and configure the IG550 Integrated Gateway.
This installation includes a Juniper J4350 or J6350 Services Router, the TGM550 Media
Gateway, and an Avaya Media Server.
Chapter 2: Installing an IG550 Integrated Gateway using the Disk on Key
●
Chapter 3: Installing an IG550 Integrated Gateway with the J-Web Quick Configuration
●
interface
Chapter 4: Installing an IG550 Integrated Gateway with the CLI
●
Chapter 5: Installing an IG550 Integrated Gateway with an existing Juniper J4350/J6350
●
Services Router
You or other personnel must also complete the following task:
Chapter 6: Administering Communication Manager on the media server to support the
●
IG550 Integrated Gateway
Note:
In most cases, you administer Communication Manager on the media server
Note:
before you install the TGM550 and Juniper Services Router. However, you can
also administer Communication Manager last.
Finally, you might need to administer WAN features or security features on the router to support
the IG550 voice applications. For information on this administration, see the following
documents, as appropriate, available at http://juniper.net.
J4350 and J6350 Services Router Getting Started Guide, Release 8.2
●
J-series Services Router Basic LAN and WAN Access Configuration Guide, Release 8.2
●
J-series Services Router Advanced WAN Access Configuration Guide, Release 8.2
●
J-series Services Router Administration, Release 8.2
●
on page 37
on page 97
on page 119
on page 11
on page 71
Issue 1.1 May 2007
9