Verifying Media Server Configuration - Avaya G700 Installation Manual

Upgrading an Existing S8300A to R2.2
4. Type cd /var/home/ftp/pub and press Enter to access the pub directory.
5. At the prompt, type ls -ltr and press Enter to list files in the pub directory.
The media server displays a list of files in the FTP directory. Verify that the directory
contains the Communication Manager .tar.gz file you have downloaded, if any.
6. Type sudo update_unpack <update>.tar.gz and press Enter.
where <update> is the release or issue number of the latest update file.
For example, 03.0.219.0-4925.tar.gz
7. Type update_show and press Enter to list Communication Manager files to verify the new
software file was installed.
If hot is shown in the Type column, the update does not require a system restart.
If cold is shown in the Type column, a system restart is required.
8. Type sudo update_activate <update> and press Enter.
where <update> is the release or issue number of the latest software file.
For example, 03.0.219.0-4925. (Do not use the .tar.gz extension at the end of the file
name)
- If asked to restart the system, select Yes. You must wait until the restart/reset has
completed before entering additional commands.
- If the system displays the message:
/opt/ecs/sbin/drestart 1 4 command failed
ignore this message.
9. Type update_show again and press Enter to list Communication Manager files.
Verify that the new software file was applied. The Status should show activated.

Verifying media server configuration

Note:
If you upgraded from a pre-1.2 release, you should have already completed the
Note:
server configuration (see
Wizard
page 292.
At this point, you should not have to enter any configuration information. In the following
procedure, click Continue to open each configuration screen and verify the that configuration
information is correct.
To verify media server configuration
1. Under Server Configuration click Configure Server to start the configure server process.
Click Continue until you reach the screen titled Specify how you want to use this wizard.
290 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
To configure the server using the Avaya Installation
on page 281. In this case, skip to Installing the new license file, if any on