7. Select the backup set and click Check Status to view the restore progress.
The Linux Migration - Backup/Restore Status screen displays.
Linux Migration - Backup/Restore Status screen
When the restore is finished, the screen will show The final status is shown below. If the
restore was successful, you will see Completed Successfully.
!
CAUTION:
At this point, you should not use any customer logins. Use only the craft login.
CAUTION:
Skip to
Verifying the time, date, and time zone
Restoring data backup
(If upgrading from R2.0.x)
Do these tasks only if you upgraded from release 2.0.x.
To restore data backup (if upgrading from R2.0.x)
1. On the Maintenance Web Interface, under Data Backup/Restore select View/Restore Data.
The View/Restore Data screen displays.
on page 288.
Upgrading the S8300A
Issue 7 January 2005
285