Avaya G700 Installation Manual page 66

G700 Installation and Upgrades: Roadmaps and Reference Information
When it runs initially, after downloading, you need to create a new entry for the switch
connection. To create new entries for the switch, follow the procedure
Administration Item
To Add an S8300 Switch Administration Item
1. Click File > New > Voice System.
The system displays the Add Voice System window.
2. Enter a name in the Voice System Name: field.
As a technician configuring Avaya Site Administration on your laptop, use a generic name,
because you will be able to use this connection name for all S8300 Media Servers.
3. Click Next.
The Connection Type dialog box displays.
4. Click the Network connection radio button.
5. Click Next.
The Network Connection dialog box displays.
6. Enter the IP address used to connect to the S8300.
7. Click Next.
The Network Connection/Port Number dialog box displays.
8. in the TCP/IP Port Number: field, type the appropriate port number.
Use port 23 for the craft login. Use port 5023 for the cust login.
9. Click Next.
The Network Connection/Timeout Parameters dialog box displays. Leave the default
values for the timeout parameters.
10. Click Next.
The Login Type dialog box displays.
11. Click the "I want to login manually each time" radio button.
12. Click Next.
The Switch Summary dialog box displays.
13. Check the information.
Use the Back button to make corrections, if necessary.
14. Click the Test button to test the connection.
15. When the connection is successfully tested, click Next; and then, Finish.
66 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
on page 66.
To Add an S8300 Switch