IP Network Region Screen, page 2
change ip-network-region 1
LSP NAMES IN PRIORITY ORDER
1
node-10-LSP_____
2
________________
3
________________
4
________________
5
________________
6
________________
2. Enter the names of up to six LSPs to be associated with region 1.
The LSP names must be the same as administered on the Node Names screen.
3. Submit the form.
4. Repeat for each network region with which you want to associate LSPs.
Administering IP Interfaces
This procedure assigns network region 1, as an example, to the S8300 media server.
To assign the network region to the S8300
1. At the SAT prompt, type change ip-interfaces procr.
The S8300 displays the IP Interfaces screen for the media server.
IP Interfaces Screen
change ip-interfaces procr
Enable Ehternet Port?
Nework Region: 1
2. The field Enable Ethernet Port? should indicate y (yes). The Node Name should be the IP
address of the S8300 media server.
Type: PROCR
Node Name: procr
IP Address: 135.9.41.146
Subnet Mask: 255.255.255.0
Administer Communication Manager
IP NETWORK REGION
IP INTERFACES
Page
2 of
19
Page
1 of 1
Issue 7 January 2005
173