Programming The Mailbox Password; How Incoming Messages Are Recorded Into Each Mailbox - Panasonic KX-F750 Operating Instructions Manual

Advanced Instructions
Programming the mailbox password
Program your own password for your mailbox to prevent other users from retrieving messages. You can
choose any 3-digit number except a number including "O".
Press MENU. Press START/SET.
9 MENU © START/SET
| 1.SYSTEM SET UP
For the mailbox 1, press
#51.
or
For the mailbox 2, press
#52.
Enter the new password
(111-999).
or
For the mailbox 3, press | O Press START/SET to
#53. START/SET store the setting.
| —To program other
Example: Mailbox 1 passwords, repeat
| from step 2.
BOX1 PASSWORD
Q TNT Press MENU to end the
| program.
Note:
e We recommend that you do not use seven (7) as a password number, because this number is used as the
greeting message re-recording command for remote operations.
How incoming messages are recorded into each mailbox
In order to leave a message in a mailbox, each owner of the mailboxes must inform their callers of their
mailbox number in advance and set the unit in the ANS/FAX mode.
@ ^ caller may call your unit (from a touch tone
telephone only).
— The common greeting message will be
(Your phone heard
mailbox number (1-3).
— Personal greeting message will be heard,
followed by a long beep.
anpa
8) es) 5] 3) HÆLD
© They may leave a message in the mailbox.
AB i
|
e/f a caller does not specify the mailbox in step 2,
the message will be recorded into the common
memory.
55