Table of Contents
Advertisement
TG5438C_5439C(e-e).book Page 38 Saturday, November 6, 2004 11:17 AM
Programmable Settings
Call options
Auto talk
When this feature is turned on, you can
answer a call by lifting the handset off the
base unit or charger without pressing
{C}. The default setting is OFF.
1
Press {MENU}.
2
Scroll to "Initial setting" by
pressing {V} or {^}, then press {>}.
3
Scroll to "Auto talk" by pressing {V}
or {^}, then press {>}.
4
Press {V} or {^} repeatedly to select
the desired setting.
5
Press {Save}, then press {OFF}.
Note:
L If you subscribe to Call Display service
and want to view the caller's information
on the handset display after lifting up the
handset to answer a call, turn off this
feature.
Voice changer
This feature allows you to modify the
sound of your voice heard by the other
party.
You can select a different voice changer
type for phone conversations ("Talk"
mode) and for the answering system
greeting message ("Greeting" mode).
The "Talk" setting will be used when you
turn on the voice changer while on a call
(page 19). The "Greeting" setting will be
used when your greeting message is
played for callers by the answering
system.
"Deep Voice": Low-pitch voice
"High Voice": High-pitch voice
"Fun Voice": Electronic sounding voice
"Off" ("Greeting" mode only):
Unmodified voice
38
The default setting for "Talk" mode is
"Deep Voice", and for "Greeting" mode
is "Off".
1
Press {MENU}.
2
Scroll to "VoiceChanger[VX]" by
pressing {V} or {^}, then press {>}.
3
To select "Talk", press {1}.
Press {V} or {^} repeatedly to select
the desired setting.
L You can sample the selected voice
changer type by speaking into the
handset. Your voice will be heard
through the base unit speaker.
OR
To select "Greeting", press {2}.
Press {V} or {^} repeatedly to select
the desired setting.
L Your greeting message will be heard
through the base unit speaker.
L To turn this feature off, press {0}.
4
Press {Save}, then press {OFF}.
Note:
L In step 3, you can also select the voice
type by pressing {1} to {3}.
L To adjust the base unit's speaker
volume, press {>} or {<} repeatedly on
the base unit.
Voice enhancer
You can turn the voice enhancer feature on
or off. The default setting is OFF.
1
Press {MENU}.
2
Scroll to "Voice enhancer" by
pressing {V} or {^}, then press {>}.
3
Press {V} or {^} repeatedly to select
"On" or "Off".
4
Press {Save}, then press {OFF}.
L When turned on, "J" will be
displayed.
Advertisement
Table of Contents
