Including The Scan Transmission Log In The Activity Report (Mode 368) - Konica Minolta BIZHUB 350 User Manual

10

Including the scan transmission log in the activity report (mode 368)

Specify whether or not the transmission log is included in the activity report.
Factory settings
Bit
Setting
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions for the corresponding functions.
Bit
7, 6, 5, 4,
3, 2
1
0
10-44
7 6 5 4 3 2 1 0
1 1 0 0 0 0 1 0 (HEX: C2)
Description
----------
Specifies whether or not the
log is included in the activity
report during scan transmis-
sions.
----------
Specifying management settings
Setting Description
110000 *Do not change these bits
when specifying settings for
this function.
0 Not included
1 Included
0 *Do not change this bit when
specifying settings for this
function.
bizhub 350/250 (Phase 2.5)
Page
Refer-
ence
----------
----------
----------