Rx Document (Administrator Mode) - Konica Minolta BIZHUB 350 User Manual

9
9.12

RX Document (Administrator mode)

The method for processing a received document can be specified. This can
be specified only for documents received over a network.
The following processing methods are available.
- Processing documents received on each line (Port): Specify the operation
performed, such as printing or forwarding the received document, for
each line where a document is received.
- Processing all other received documents (All Other Documents): Specify
the processing method of documents received on lines other than ports.
If "Port" is clicked, settings can be specified for the following.
Item
Distribution
Conditions
RX Doc. Set-
tings
Forwarding
Destination
If "All Other Documents" is clicked, settings can be specified for the
following.
Item
RX Doc. Set-
tings
Forwarding
Destination
Note
If bit 7 of mode 306 is set to "1" in the Soft SW Setting screen, only "Port"
is available. For details, refer to "Specifying software switch settings
(machine functions)" on page 10-28.
9-58
Specifying settings using PageScope Web Connection
Description
Select whether or not an operation is performed when a document is received
on the selected line.
Auto: Select this setting to not process the received document
Specifies: Select this setting to specify where the received document is saved
or forwarded.
When "Distribution Conditions" is set to "Specified", select the processing
method for the received document.
Forward: Select this setting to forward the data to the specified destination.
Print: Select this setting to print the document.
Print & Forward: Select this setting to print the document and forward the data
to the specified destination.
Specify a forwarding destination when "RX Doc. Settings" is set to "Forward".
Click [Select Forwarding Destination], select the forwarding destination ad-
dress, and then click [Apply].
Description
Select how the received document is processed.
Memory RX: Select this setting to save the document in the memory.
Forward: Select this setting to forward the data to the specified destination.
Print: Select this setting to print the document.
Print & Forward: Select this setting to print the document and forward the data
to the specified destination.
Specify a forwarding destination when "RX Doc. Settings" is set to "Forward".
Click [Select Forwarding Destination], select the forwarding destination ad-
dress, and then click [Apply].
bizhub 350/250 (Phase 2.5)