Registering Destination Information To One-Touch Dial Buttons; To Register Destination Information To A One-Touch Dial Button - Konica Minolta BIZHUB 350 User Manual

8
8.2 Registering destination information to one-touch dial
buttons

To register destination information to a one-touch dial button

If bit 7 of mode 466 is set to "1" in the Soft SW Setting screen, you must log
on with external server authentication before an LDAP search can be
performed.
1
Press the [Utility/Counter] key.
2
Touch [User Setting].
3
Touch [E-Mail Input].
– If the optional fax kit has been installed, touch [FAX].
4
Touch [One-Touch].
5
Select the one-touch dial button to
be programmed.
6
On the LDAP Search screen, touch
[ON], and then touch [Enter].
8-6
Using an LDAP server
bizhub 350/250 (Phase 2.5)