Network Board Set; To Specify The Network Board Settings - Konica Minolta BIZHUB 350 User Manual

3

Network Board Set

Settings can be specified for the following.
Item
Auto
100M-Full
100M-Half
10M-Full
10M-Half

To specify the network board settings

1
In the Network Setting screen, touch [Basic Settings].
2
Touch [Network Board Set].
3
Touch [Network Board Set], and then
select the transmission speed.
– "Auto" is the usual setting.
4
Touch [Enter].
3-14
Description
Selects the transmission speed automatically by auto-negotia-
tion.
Manually specifies a transmission speed of 100 Mbps in full-du-
plex mode when the transmission speed cannot be selected au-
tomatically.
Manually specifies a transmission speed of 100 Mbps in half-
duplex mode when the transmission speed cannot be selected
automatically.
Manually specifies a transmission speed of 10 Mbps in full-du-
plex mode when the transmission speed cannot be selected au-
tomatically.
Manually specifies a transmission speed of 10 Mbps in half-du-
plex mode when the transmission speed cannot be selected au-
tomatically.
bizhub 350/250 (Phase 2.5)
Setup