Specifying The Transmission Report Printing Condition - Konica Minolta bizhub 200 User Manual

3
Note
The following parameters and functions have no effect, even if settings
have been specified.
- "TSI" on the Setting 1 tab
- "Dest. Insert" on the Setting 1 tab
- "Rotation TX" on the Setting 1 tab
- "Subject Selection" on the Network tab
- "Reply Address" on the Network tab
- "Email Notification" on the Network tab

Specifying the transmission report printing condition

The conditions for printing the transmission result report can be specified.
The conditions for printing the transmission result report are preset with the
"Report Settings" parameters from the Administrator Management 1 screen.
Follow the procedure described below to change these conditions.
1
Touch [Menu].
2
Touch [TX Report] on the Setting 1 tab.
SCANReady
One-Touch
Setting 1
TSI
2in1
Job List
3-22
Standard
Direct
Quality&
Search
Input
Reduction
Setting 2 Network
Dest.Insert TX Report
2-Sided TX Rotation TX
Chain
Menu
Memory
100%
Free
Scan to PC operations
200/250/350