Ip Relay Operations And Others - Konica Minolta bizhub 200 User Manual

Troubleshooting
Problem
ImageReceiver was
not started.
The message
"Number of Scanner
Keys reached maxi-
mum." appears.
The message "Scan-
ner key name has
invalid character."
appears.
The message "Incor-
rect IP address" ap-
pears.
The message "Cur-
rently this command
not accepted." ap-
pears.
The message "Failed
to write image file"
appears.
The message "Image
folder not found" ap-
pears.

IP relay operations and others

Problem
A fax cannot be sent
from this machine.
[Network Settings]
does not appear in
the Administrator
Management screen.
200/250/350
Cause
TCP/IP is not ready.
Since ImageReceiver was
started up during the previous
uninstallation, then reinstalled
without restarting the compu-
ter, ImageReceiver may have
been deleted after restart.
Six IP Scanner scan buttons
have already been pro-
grammed.
Characters other than the
standard characters cannot
be used in button names.
Letters are entered into the IP
address.
While communicating with the
copier, for example, while
programming or deleting a
button, the next transmission
is performed.
There is not enough space in
the save destination.
There is a problem with the
drive of the save destination.
The specified folder does not
exist.
Cause
The communication mode for
gateway transmissions is in-
correctly specified.
The device is not operating
correctly.
Remedy
Open Network and Dial-up Connec-
tions in Windows, add the Microsoft
TCP/IP protocol, and then restart the
computer.
Uninstall IP Scanner, and then re-in-
stall it.
Delete any unnecessary buttons.
Specify a button name that contains
only the standard characters.
Specify the IP address in the format
xxx.xxx.xxx.xxx.
Wait until the current connection is cut
(until the message "Currently this func-
tion is not available. Try again later."
disappears from the taskbar at the bot-
tom of the window) before performing
the next operation.
Change the save destination or create
some free space on the drive.
Change the save destination.
• Check the name of the storage fold-
er.
• Change the name of the storage
folder.
Remedy
Check the settings for gateway trans-
missions.
Contact your service representative.
8
8-11