Resending - Konica Minolta bizhub 200 User Manual

IP Relay operations
No.
4
5

Resending

A maximum of 20 documents that could not be sent are saved to be sent
again.
1
Touch [Job List], touch [Type], and then select the document that could
not be sent.
– If [Retry] or [Change Destination] appears in the screen, the docu-
ment can be resent without having to be scanned again.
2
To send the document to the same recipient, touch [Retry].
– To send the document to a different recipient, touch [Change Des-
tination].
200/250/350
Item
Transmission results
Transmission image
Description
Shows the transmission results. Any of the following may
be indicated.
OK: The transmission was completed successfully.
INTERR: The transmission was interrupted.
F.MEM: The memory is full.
NG: The transmission was completed unsuccessfully.
PT.DEL: The transmission to some recipients failed.
F.DATA: The size of the data exceeds the allowable limit.
IMG NG: The transmission resolution was incorrect so the
transmission was ended.
Error code: For details, refer to "Error codes" on page 8-4.
Shows a part of the transmitted image.
5
5-29