Ip Scanner Operations - Konica Minolta bizhub 200 User Manual

8
Problem
Transmission from a
terminal or reception
to a computer cannot
be interrupted.

IP Scanner operations

Problem
Transmission is not
possible.
The data is not re-
ceived by the com-
puter.
The data was re-
ceived, but the image
cannot be viewed.
Transmission from a
terminal or reception
to a computer cannot
be interrupted.
8-8
Cause
It takes some time to interrupt
the operation.
Cause
--------
Settings are not specified cor-
rectly in the dialog box that
appears after clicking "Re-
ceive Settings", then "Con-
nection Filter".
The LAN cable is damaged.
Two LAN boards are installed.
--------
Another mailer is started up.
IP Scanner has not started up.
An application that allows im-
ages to be viewed is not in-
stalled, or the application is
installed, but is not linked to
images.
An error occurred while the
image was converted by IP
Scanner or the file was not
created correctly.
It takes some time to interrupt
the operation.
Troubleshooting
Remedy
Wait until the operation is interrupted.
To interrupt the operation quickly, exit
ImageReceiver. However, data already
received at the computer but not yet
processed with IP Scanner will be de-
leted.
Remedy
Check the list of transmissions in the
Job List screen for details of the trans-
mission error, and then refer to the ta-
ble of error codes.
Check the settings in the dialog box
that appears after clicking "Receive
Settings", then "Connection Filter".
Replace the LAN cable.
This configuration cannot be used if
two LAN boards are installed. Change
the priority order in the computer (Win-
dows) network settings.
Check the list of transmissions in the
Job List screen for details of the trans-
mission error, and then refer to the ta-
ble of error codes.
Exit the mailer.
Start up IP Scanner, check for new
transmissions, and then replace the re-
ceived data file with the image file.
Install the viewing application.
Link the file to a viewing application
that allows you to view TIFF and PDF
files.
That file is unusable.
Exit ImageReceiver, and then send the
scan again.
If the image resolution is high, reduce
the resolution or decrease the number
of pages before scanning.
Wait until the operation is interrupted.
To interrupt the operation quickly, exit
ImageReceiver. However, data already
received at the computer but not yet
processed with IP Scanner will be de-
leted.
200/250/350