Specifying Additional Functions - Konica Minolta bizhub 200 User Manual

5
5.5

Specifying additional functions

Touch [Menu] in the screen that appears when the [Fax/Scan] key is pressed
to add the following functions.
Function
Setting 1
Setting 2
Note
The following parameters have no effect, even if settings have been spec-
ified.
- "TSI" on the Setting 1 tab
- "Dest. Insert" on the Setting 1 tab
- "Rotation TX" on the Setting 1 tab
- "Subject Selection" on the Network tab
- "Reply Address" on the Network tab
- "File Name" on the Network tab
- "EMail Notification" on the Network tab
5-22
Description
TX Report Select the conditions for printing the transmission results
report.
Default: Select this setting to print the report according to
the setting specified from the Administrator Management
screen.
ON: Select this setting to print the report, regardless of the
transmission result.
If TX Fails: Select this setting to print the report only if the
transmission failed.
OFF: Select this setting to not print the report, regardless
of the transmission result.
2in1 Select whether or not to send the data using the "2in1"
function (reducing two pages to fit in a single page).
2-Sided TX Select whether or not a double-sided transmission is per-
formed. The position of the binding margin and the page
orientation can also be specified.
Priority TX Select whether or not the data is sent with priority over the
other jobs.
Timer TX Setting Specify the time that the transmission is sent. Touch [En-
ter] to specify that the transmission will be sent at the
specified time.
Stamp Specify whether the scanned image is stamped to indicat-
ed that it has been scanned. The document must be load-
ed into the ADF.
Note
In order to use the "Stamp" function, optional
stamp unit must be installed.
IP Relay operations
200/250/350